Loft-style wall sconce

Wall lights in the interior are used very often. Models in the "retro" or "vintage" style have long been popular, and not so long ago a style called "loft" came into vogue. New-fashioned trend came to us from American urban premises with high ceilings, formerly abandoned factories and plants, converted into housing.

Such an interior is preferred by successful creative people under the age of 40. It is characterized by the presence of deliberately rough, untreated concrete walls, metal or wooden beams and floors, external electrical wiring, wooden or metal furniture and a minimum of parts in the room. Spacious rooms with high ceilings and huge windows create an atmosphere of lightness, airiness.

The huge area of ​​the room and high ceilings, of course, require proper lighting.The light should be as functional as possible and meet the following requirements:

1. There should be a lot of light. Multiple light sources will create an atmosphere of spaciousness.
2. Point lighting will add comfort to isolated areas.
3. Extraordinary lamps will not only focus on the interior elements in the industrial style, but also show the non-triviality of the design.
4. Lighting should be subject to all sanitary and hygienic standards.

The French name "bras" (bras), firmly rooted in Soviet reality, in translation means "hand". Having made some simple logical conclusions, we can assume that this concept includes lamps, to which "hand is at hand."

The history of sconces began in the XVII century. It was then that they began to be widely used for room lighting. Even modern manufacturers could envy the range of materials from which the sconces were made by masters of that time. This includes various metals (mainly copper and bronze), and Venetian glass, and precious woods.

When should I install sconces? The answer to this question is quite simple - always.

A sconce can provide absolutely any room the highlight that was not before it was installed. Since the main function of the wall lamp is to create additional lighting, then it simply needs to be installed in mirrors, works of art, above the frames with photos, etc.

If the corridor or hallway is not very large, then a few sconces can completely replace the chandelier. Sconces are also useful when you need to create an intimate atmosphere. Or focus on any area in the room. The sconce itself can be a decoration of the room and not at all used for lighting purposes.

Like everything else in the loft style interior, most wall lights are characterized by simplicity of lines and minimal design. However, sometimes you can watch and massive, decorated with crystals of the model.

If you are a fan of minimalism and are the happy owner of an apartment decorated in the style of "loft", then these workshops are for you.

In just two hours, you can make a lamp out of concrete.

For a lampshade need:

• Cement mixture. You can also use paint for concrete.
• Wire with high quality switch. Choose the strongest wire that can support the weight of a concrete lamp. It is advisable to thread the wire in a chain of metal.
• Cartridge.
• A tube and a set of nuts.
• Fastening materials.

• Two plastic bottles of different diameters. Larger capacity can be a two-liter, preferably without a pattern and dents, as it is imprinted on the lampshade. And the second should be so large that a cartridge with a light bulb fits there.

• Light bulb
• Container for mixing cement mortar.
• Various improvised tools: pliers, knife, drill, trowel for mixing cement mix, scissors.

Production Guide:

• The first step is to cut off the bottom of a large plastic bottle.
• Drill not very large holes in the covers strictly in the middle (it is more convenient to do this when the covers are put on).
• Fix the tube on the lid of the bottle below.
• Attach the top bottle to it so that the bottles do not move, fasten them with self-tapping screws.
• Dilute the concrete mix and fill out the form. Shake the bottle or ram it with a stick to ensure a firm filling of the concrete.

• Remove the screws and form the edge.
• After the concrete has partially dried, carefully remove the bottles. Be careful not to damage the composition.
• After complete drying, treat the surface with special emery paper. Connect the wire to the electricity.

For the bathroom, decorated in the style of "loft", it is also possible to make an unusual lamp. The size of the lamp itself, as well as the number of lamps may vary, depending on the size of the room.

Necessary materials:

• Pine wood (in this example, 0.8 meters for a model with three lamps).
• Bars to create the deepening of the wire.
• Three ½ flange.
• Three ½ threaded tubes.
• Three ½ x ¾ elbow fittings.
• Chuck - 3 pieces.

• The wire.
• Hexagonal bolts - 12 pieces.
• Screws - 12 pieces.
• Light bulbs.
• Varnish for wood.
• Glue for wood.

Instructions for making:

• Fit the bars and the board. It is necessary to apply glue on the bars and press them to the base. Remove excess glue, allow to dry.
• Paint bolts and other fasteners with enamel of the required color.
• Insert the cartridge in ¾ hole elbow fitting, add glue for a stronger connection. Full drying occurs after 24 hours.

• The front and side of the base must be varnished. To achieve a matte effect, immediately after varnishing, wipe the base with a dry cloth. Repeat the procedure several times until you reach the desired effect.
• Drill a hole for the wires.
• Screw the flanges to the base.
• Lay the wiring and assemble the structure. It is necessary to use parallel wiring. This is convenient, since if one light bulb burns out, the others will burn.
• Suspend the luminaire and connect to electricity. Screw the bulbs and enjoy.

Heat and comfort, as a rule, are arranged by women, but there are real men who have both right hands. They can do wonderful things with these hands.

Comfort in your home, which is made in the interior of the "loft", can be a reward for her husband if he takes the tools in his hands and turns on the fantasy. By the way, many men are able to draw and make chasing or carving out wonderful pieces of wood. We offer a good wall lamp idea that men only can do.

Work on the implementation of this model wall lamp requires only diligence and inspiration. You can always find an empty can of tomato paste, condensed milk or beer. The main thing is to prepare a place to work so that it is convenient.

The bank needs to be washed. Then put inside a bar of wood so that you can then punch the wall of the can with a nail.

From above, the can needs to be painted either in a dark or in some bright color, so that both day and evening such tin can fixtures look attractive. The paint can be taken in an aerosol, or you can apply the usual oil paint with a brush on our lamp.

Beautiful highlights create a fabulous environment in your room. Imagine how nice it will be in a cool evening to sit next to your beloved, wrapping yourself in a warm blanket, leaning against each other, with hot tea, and admiring a modern lamp that your loved one has made for you.

They are mainly performed with a switch on the case. It will be more convenient. Also cans can be attached in unpainted form, which will also be very original.

How to make a loft-style wall sconces with your own hands, see the next video.

• Company Loft it offers its customers high-quality products that will last for many years. You can choose a model that will meet all your expectations. You can see a few examples of Loft It products.

• Trademark Loft concept produces mostly non-standard sconces. In the line of this manufacturer you will find exclusive products.
• Company "Lustriko" It offers customers stylish wall lamps that combine reliability and beauty. You will be surprised by the low cost of products, as well as their durability. The company "Lustriko" has released several lines of various models.