Access to interior doors

Installation of interior doors is a simple operation that can be performed even without having similar work experience. As a frame for such structures used doorframe, which is attached directly to the wall. The dimensions of this product often do not exceed much the same parameters of the door leaf. But the thickness of the wall in most cases is much wider than the whole system. Correct this difference will help the door on the interior doors.

Dobora are protective strips that are installed next to the door frame. Often they can be found on the entrance or interior doors. The latter option is more relevant, as the design decorates the surface, including the arrangement of high-quality slopes.

Technically, a door hinge is a regular strip or board of a certain thickness and length. At the same time there is no universal standard that would regulate its technical characteristics. Designs are installed close to the box, which eliminates the appearance of cracks and other ugly openings. Today, factory products are often called doborya, which are distinguished by beautiful design and high-quality finish. Such products consist of several main parts:

• Two vertical boards. Their length corresponds to the height of the doorway. They are mounted directly on both sides of the frame. Fixation can occur with glue, screws or other specialized methods.
• Horizontal jumper. Structurally, it connects the two vertical supports into a single integral system.

The width of all these three elements is often equal. If the parameters of the opening are not standard, then each individual finishing board is adjusted individually for the required dimensions.

Finishing strips have several significant advantages:

• Easy installation. Installing doborah in most cases does not require the use of special fasteners.
• Durability. The product fits snugly to the surface of the slope, not allowing it to be destroyed by accidental physical impacts.
• Variety of styles. Dobora can be made for almost any color or structure. At the same time, they are suitable for both wooden and plastic interior systems.

Endorings are simple designs that are easy to construct by yourself.

These products are very practical and solve several basic tasks:

• The main purpose of the dobor is the addition of a door frame for decorating the opening. At the same time installation of such structures does not require special skills. Often, the doors are installed by specialists who mount the door. To create a unique system, dobory can be supplemented with various decorative inserts or carvings (wood).
• Finishing excludes additional finishing of slopes. This saves time and effort of specialists. It should be noted that the quality of the finish does not suffer. In some cases, the resulting surface with the use of additional strips is more beautiful.

• Additional insulation.A lot of cold air passes into the room through the cracks between the box and the wall. But this phenomenon is relevant only for the entrance structures, while interior systems are free from this drawback.
• Elimination of distortions and strengthening of a cloth. Some modifications allow you to visually align all the flaws in the door frame. This is achieved by selecting various types of products that can even be attached directly to the door frame itself.

Door openings are simple structures that are very difficult to divide into types. But still there is a classification that takes into account the design features of the slats. Depending on these values, there are several types of additional products:

• Standard. Outwardly, these holes are ordinary strips of small thickness.However, they do not have any additional structural elements that complicate the system. Interior doors are often made of glued slabs of wood waste. To give them an original design, their ends are trimmed with special edges. It also allows you to increase the resistance of the material to moisture.
• Telescopic. Products of this type are more versatile. A feature of the telescopic dobor is the presence of special grooves on the ends of the strip. Outwardly, they are very similar to the systems that are equipped with plastic or wooden wall paneling. With the help of these slots, the dobor can be extended to almost any width. Therefore, such structures are much easier to adapt to different widths of the door opening.

• Combined. Holes of this type are a combination of casing and strips. These corner structures are universal and allow you to better cover the doorway. Such products are also complemented by special grooves to simplify the installation procedure.

As for the shape of the dobor, it is not so diverse. The most popular and cheap modifications are the usual flat rectangular boards made of metal or plastic. But there are models that are complemented by decorative design. Today in the form of columns are particularly popular. They are made only of wood or its derivative materials. If desired, the manufacturer can supplement them with various decorative plates or inserts. But the cost of such products is already much higher than the classical modifications.

Dobora complement the door frame, so be sure to adjust to fit its dimensions. This is necessary to create a harmonious and practical system that will last a long time without replacement. The modern market represents a lot of standard sizes of additional panels, which allows to adapt them to any dimensions of the opening:

• Length. This value depends on the purpose of the specific item. For example, transverse strips can have a length of from 60 to 200 cm, depending on the type of door on which they are installed. As for the vertical slats, their height varies in the range from 190 to 220 cm, depending on the modification. If you need to install doors on non-standard doors, then under the order this value can be increased to 250-260 cm.

• Width. This characteristic also varies widely. Today, both wide and narrow modifications are presented on the market. The width of the dobor often does not exceed 20 cm. At the same time, each manufacturer produces several standard sizes, which differ in small steps. Thus, standard constructions are 10, 12, 15, and 20 cm wide. Parameters of telescopic end points may also differ slightly - 90, 12, and 150 cm.
• Thickness. This parameter is one of the most important, as the decorative appearance of the resulting system depends on it. The most common size in the market is 10 mm. Such products are very popular due to the fact that it fits under many door frames.But this type of plank does not end there. The thickness of these products can vary from 6 to 30 mm depending on the material and type of manufacturer. Focus on the parameters of the door frame.

A feature of interior doors is that they are made from materials that are practical and unique decorative properties. Therefore, in the manufacture of dobori take into account the same features. Here it is important that the products fit the basic design.

Today, for the production of interior doors, the following materials are used:

• PVC Plastic dobora are thin plates, resembling a lining. They differ in low durability and simple design. Therefore, inside houses are used relatively rarely. Sometimes they are complemented by plastic door boxes to the balcony or bathroom. The advantage of this product is that it is not afraid of moisture.
• Tree. Additional panels from the array - this is the most expensive and high-quality products. The material is durable and durable, and the unique texture allows you to combine them with almost any style of interiors.Wooden structures are made from a variety of trees. The most common are dobori from pine, as it is well processed and available almost everywhere. But when choosing these components it is important to consider also the material from which the door frame is made. Therefore, the best option would be to dobor from the same breed as the doors themselves. This will create a smooth transition pattern, which perfectly fit into the interior.

• Chipboard and hardboard. These substances are also very relevant for obtaining supplements. The material has a low price and relatively good strength. But over time, the stove can absorb moisture, which will lead to swelling.
• MDF. Dobori from it differ in unique decorative parameters and rather low cost. To give the material a unique design, it can be covered with various protective films (lamination and other options). These products also do not allow moisture to penetrate inside, which prolongs the life of the product.

After installing the door leaf often raises the question of finishing slopes. Today, this problem is very often solved with the help of additional workers. But, before you run to the store for these products, you should decide whether you need them. It is recommended to use such constructions if the wall thickness is at least 13-15 cm. In this case, the box will select only 5-7 cm, and the rest will need to be patched with a finishing board.

When buying a doborna strip, you should follow a few simple recommendations:

• First of all, you need to decide on the dimensions of the board or timber for dobor. To do this, measure the dimensions of the wall near the box to find out the height and width of the product. Please note that all measurements should be carried out taking into account that the bar will hide a little in the groove of the door frame.

• The next step is the choice of strips for a specific type of door leaf. Here they often take into account the material from which the doors are made and their type. So, for example, the same door frames will not work for a case-door, as for classical single-wing modifications. The styling of the dobor is chosen individually, taking into account the personal preferences of the buyer and his financial capabilities.
• Manufacturer. This characteristic is also one of the most important, as it affects the quality of the material. Today, many companies produce dobora, but not all of their products can serve for a long time and reliably. Among all this diversity, such brands as Mario Rioli, Matadoor and many others should be highlighted. In this case, be sure to consider customer reviews about each of them in order to purchase quality products.

Dobornaya bar for interior doors can be made independently. Here the main thing is to choose a material that will suit the color of the basic style of the door leaf and the box.

Replace the factory dobora can be several materials:

• Plywood. To do this, fit both ordinary and moisture-resistant type of substance. A variety of products allows you to choose not only the thickness, but also some decorative features of the material. After the manufacture of plywood dobor, it is necessary to cover them with protective varnishes or paints in order to prevent stratification.
• Wooden plank. Often dobor - this is this type of product. To get a quality plank, the board is carefully polished and varnished. In the presence of the router, not its surface can be cut a few decorative elements.
• Plastic lining. The best option for manufacturing dobor. Products have a low cost and perfectly cut, which will allow you to cut strips of the desired size.
• Laminate. This material is also available in slats that are easy to attach to the wall. But deliberately they are rarely used, as they are of high value. Dobra can be equipped from the remains of laminate, after its laying on the floor.

Dobora play a practical and aesthetic role in an ensemble with a door and always match the style of the door structure, matching it in shade.

Wide door openings on the front door box will help to beautifully decorate the vestibule in the same style with the canvas.

Now quite often they use a wide range for installing fixtures in it, which is very convenient and practical.

In the luxurious retro interior, the dobori emphasize the style and solidity of a large double door.

Identical additional elements “not falling out” of the overall design concept will be suitable for light solid-wood doors.

For how to install doors on interior doors, see the following video.