How to restore interior doors?

Interior doors are considered a necessity for the interior. Their service life is rather big, but the facing deteriorates rather quickly. Therefore, it is worth thinking about how to return them a pretty look.

Special features

If your interior doors needed restoration, then make this work really the most, observing the sequence and pay attention to the subtleties.

First you need to remove the old surface. To do this, apply a special tool on the surface that will help remove paint and varnish. After that, wait for the time and remove unnecessary paint. If it is not completely removed, then it can be removed with an iron.

Next, we begin the restoration work. To do this, you need to polish the surface using sandpaper and moving along the fibers.If defects are found, they must be eliminated. For this perfect acrylic filler.

Then you can apply the paint, choosing the right tone. Nowadays, there is a huge selection of stains with excellent tree protection properties. Finally, varnish the canvas.

In what cases is required?

When the door loses its former appearance, the thought of replacing it immediately arises, and few people think about its restoration.

Let's consider the cases in which the update will be a profitable solution:

  • It is cheaper to repair a canvas from an array than to buy the same new one;
  • It is rational to restore an old door if it is expected to replace the interior as a whole;
  • Updating an old wooden door is reasonable when it was made by hand and most likely it has an original pattern. Then it is a full-fledged antiques, which is stupid to throw out;
  • Hand-made repair allows you to make an inimitable product, which will be the center of the interior;
  • In case the door of non-standard dimensions, then it is easier to repair than to buy a new one;
  • Self-repair - the work is very entertaining and interesting.

How can I restore?

Depending on the material from which the door is made, the method of its restoration will differ.

Wood

Of particular importance are wooden doors, which are based on solid wood. Despite the richness of the look of analogues of such doors, these materials look more profitable. Usually, these doors only need to change the exterior finish, since most of them remain in good shape. So, the doors of "Stalinist" times were made exclusively from the array. Such doors in the “stalinka” of enormous size, so they are better to upgrade than to acquire new ones Oak constructions need only repaint.

Repair of wood canvases is quite an interesting process that will give you pleasure.

To choose a favorable shade for the door, you should consider a rich selection of stain, which paint the wood in different colors. It is recommended to apply it with a spray gun or a brush. Next, the surface is updated with a special varnish.

Fiberboard

When upgrading doors from fiberboard, at the time of removing the old paint do not use a soldering iron and coarse sandpaper, because the thickness of the coating is quite thin.It is necessary to clean the paint very carefully with a fine-grained pelt or iron, which must be wrapped in cloth. Subsequently, the door can be repainted. It is possible to slightly change the facade and glue embossed strips or to simulate paneled doors.

Also, the door of fiberboard can be decorated using veneer. It is enough to glue it to the old base, and your door will again get an attractive look. It is worth noting that this material has a low price, which will favorably affect your wallet. You can also update at home using MDF panels. Such repair options are suitable for both the doors to the rooms and the door to the bathroom.

Be sure to consider the fact that when repairing a door, you must also restore its box. It is not advisable to acquire a new one, because when it is installed, openings can be formed between the door and the threshold.

PVC

Plastic doors do not always look great, and if they are polluted or are in unpleasant climatic conditions, they quickly lose their former attractiveness. But you should not immediately think about how to acquire and rearrange the old door to a new one, it would be wiser to give her a new look.

This can be done by one of the following methods: glue the color vinyl film, glue the veneer, cover it with water-based polyurethane paint. Any of the ways in its own tempting and budget.

Next, we present a small master class on the dyeing of plastic paintings.

Coloring involves the preparatory and painstaking cleaning of the plastic plane from stains and film. With the help of cleaning agents, the final cleaning is done and the dyeing process begins.

Even before painting, it is necessary to add the necessary ingredient - hardener, after which the paint must be filtered. It is recommended to paint carefully, using a spray gun. Apply to one layer, if necessary, add a few more layers.

Dry the paint at different temperatures. At room drying will take about nine hours, but if you dry at a temperature of forty degrees and above, the paint will dry in an hour or an hour and a half.

It is important to know that absolute crystallization occurs in about a week. In comparison with other methods of repair, this option is the most time-consuming, so we recommend looking at other restoration methods.

The use of vinyl film allows you to quickly and without too much difficulty decorate the door of various drawings and ornaments. A huge selection of patterns will help you choose the most suitable solution for any style and interior. It is quite easy to glue it: a drawing is superimposed on the prepared plane in advance, after which the base is removed and the film is glued.

It is fundamentally important to take into account some factors: after cleaning and degreasing, even before sticking the picture, treat the plane with a solution with soap. This step is necessary for comfortable pasting and will relieve air from entering the image.

In this process, you will need an assistant, especially if the area intended for gluing is of a large size. Never wet the base of the paper, otherwise you can not tear the film from it.

Another way that stands out for its ease and the ability to give your door a truly luxurious look is veneering. This method of restoration is not very well known, but thanks to it, the old plastic door can easily be transformed into a wooden door,as a result, the external difference will not be very noticeable.

At its core, veneer is natural wood, so the appearance will be quite attractive. Before pasting the veneer panels, it is also necessary to carry out preliminary work on the plastic surface: first, it should be cleaned and degreased, then the protective layer should be removed, attach the veneer and glue with an iron. Be sure to adhere to the optimum temperature so that the glue adheres perfectly and the plastic does not deteriorate using a thick cloth instead of a gasket.

In general, hand-made repair of doors is not very difficult, if you have ever come across such works.

Laminated

It is also possible to repaint a laminated door or stick a veneer on it. In the process of using laminated doors wear out and scratches appear on them. It will be rather difficult to get rid of such defects, because this coating is practically impossible to process.

For damaged laminated doors it is impossible to use wood stain and varnish, because before applying these tools you will need to use putty to repair defects, and it will be visible under the varnish.

Of all the variety of paint and varnish compositions only paint will give the laminated surface a former look. But to paint it yourself is quite difficult, since there is no adhesion between the plane and the paint. On a smooth laminate the paint doesn’t hold well enough, so it’s likely to peel off for a month and the doors will look even worse than before the restoration.

To repair an iron door can be done in different ways: decorate with dermantine, stick PVC film or veneer panels.

Colors and decor

After the preliminary work is completed, you can proceed to decorating the doors. There are some options for decorating the door. These include sanding with staining and the further use of varnish, gluing wallpaper, drawing with a stencil, using vinyl stickers and overhead facades and reconstruction of the canvas.

These methods are widely used in our time. Consider them in more detail.

Grinding and painting

This is a great option for which veneered planes are suitable. Properly selected composition of the coloring drug makes it possible to select a wooden pattern on the surface.After preliminary work, the door is painted in the desired color. For the highest color saturation, it is possible to apply two or three layers. With the help of paint it is possible to preserve the former decor of the door. To prevent the development of mold and mildew, cover the surface with a stain before applying varnish.

Wallpapering

To restore the white interior door with wallpaper is an attractive option that can be used even annually. This method is not difficult and not expensive enough.

To freshen the door leaf wallpaper, first you need to apply the soil in one layer and wait until it dries. Then you need to cut the canvas from the wallpaper. Pay attention to the size of the cut out piece of wallpaper coincides with the size of the door, or cut the canvas a little more for allowances. After that, apply glue to the surface and attach the wallpaper, smoothing and removing excess glue.

Stencil drawing

Old doors can also be transformed using stencils. They can be bought ready-made or made by yourself. To apply a picture, do the following: first of all, the prepared surface should be coated with varnish or paint and wait until it dries. A stencil is applied to the dried surface and attached.Then the free space from inside or outside paint and remove the pattern. Next, wait until the paint dries.

Vinyl stickers

Vinyl decal decoration is a modern finishing method. Vinyl stickers withstand moisture, water and sun, if necessary they can be washed. Stick them on the door elementary - you need to lean the sticker and smooth it. Modern sticky drawings can be used several times, they are simply removed from the plane and glued to another place. They are often used to decorate plastic doors onto a balcony.

False facades

Sometimes the interior door is not enough to restore, but you need to change its facade. This will help you overhead facades, which are made from different materials, but it would be wiser to buy an overlay from MDF. They do not absorb moisture, they retain their shape for a long time, they are simply attached to self-tapping screws or PVA glue, and they also have a low price.

Decorated in this way the door will decorate your interior.

Update canvas

If you wanted to increase the number of glasses in the door leaf, or change their location altogether, you will need to work hard.After you have removed the paint, remove the glass and close the openings with plywood. Make a cut in the right place, then coat the door with varnish or paint and wait for it to dry. Then attach the glass to the bead in a new place. Instead of glasses, you can attach decorated panels.

Furniture Decor

In case your door was made many years ago, it is most likely equipped with antique fittings, which it is better to restore than to throw away. To do this, sand the object with sandpaper and apply primer-enamel, which will emphasize all the beauty of the ornament. After the pen dries, attach it in place.

The above methods are acceptable for any kind of door. But some want to see a new facade with a bright pattern on it. In such cases, the paint is not suitable, and you can use other options.

One of them is sticking photo wallpapers. This method makes it possible to give the door an original look. Wall mural stand out a variety of images and colors, but with frequent touch and pollution, they lose their former appearance. Sticking vinyl on the door of the wallpaper has the same disadvantages and advantages as that of the photo wallpaper, but they stand out because they cost much less.

Restoration of interior doors using fabrics is a very original and extravagant idea. It is enough to make a composition and glue it to the surface, using not only fabric, but also notes, posters, maps and old photos. This method will cause incredible delight of your guests.

When performing all the above works, be extremely careful that everything looks perfect.

Necessary tools and materials

When repairing old interior silt balcony doors, it is necessary, first of all, to carry out preliminary work, having prepared the surface for work.

This will help you some tools:

  • The solvent corresponding to the door covering material;
  • Building hair dryer, iron or blowtorch;
  • A skin with a large and small crumb;
  • Sander;
  • Screwdrivers, hammer, knife, pliers, film.

For the renovation work itself, a spatula, beadings, putty, stain, varnish, paint, impregnation, paint brushes, sponges, rollers, door lock, hinges are needed.

Successful examples and options

Here are some examples of the most interesting door decorating ideas.

In this photo you can see how well you can imitate any skin with the help of ordinary leatherette. As a result, you get a beautiful and stylish option.

Option, how else can you make the door unique in its own way. This decoration - door upholstery with fabrics.

To simulate the panels you need two different colors of paint and paper tape. Thanks to your imagination, you can embody various combinations of tones that will decorate your interior with its uniqueness.

Among the variety of colors you will find coverage, with the help of which your door will be no different from the slate. And in your house there will be additional space for recording reminders.

It is possible to give an original look to doors by means of rivets which it is possible to buy in accessories stores.

An unusual option for your interior will serve as wallpaper on the doors. If you correctly select the image on them, the result will not be distinguished from the ideas of famous designers.

Small scratches and defects on your doors can be decorated using a vinyl sticker. She will perfectly cope with such problem and will successfully fit into your interior.

A drawing was applied to the door with the help of decoupage napkins, and artificial cracks were applied using the craquelure technique. This method is quite beautiful and attractive. He will give a certain atmosphere of antiquity to your home.

Here the canvas is decorated with stained glass, which will complement your interior with its originality and appeal. Stained glass in the door can be one or more.

And finally, use a stencil to significantly change the facade of your door. With it, you can portray anything you want, as long as you enjoy the result.

At first glance, these methods seem quite complicated, but as they say, the main thing is to start, and everything will work out, even if you are a beginner.

For information on how to restore the old interior door yourself, see the next video.

Comments
 Author
Information provided for reference purposes. For construction issues, always consult a specialist.

Entrance hall

Living room

Bedroom