Features installation dobor on the door

Installation of the door leaf often involves the design of slopes for the purpose of their decoration and alignment. The optimal solution to this problem are dobori, which are installed on the wall near the box. These designs are small strips of wood or plastic. Before you install these products, you should know the installation features dobori on the door. This will simplify and speed up all installation operations.

Finishing holes are small strips or boards that attach to slopes. They are used only on openings that are of considerable width, and the box itself is not capable of closing them. Technically, these elements are not mandatory attributes of the entrance or interior doors.Without them, you can do well, but you will need to form a wide slope, which is not always convenient and practical.

Door openings have several advantages over other ways of finishing:

• Possibility of installation on an uneven surface. Therefore, additions exclude additional finishing of the wall, which reduces the cost of materials.
• High-quality protection from pollution.
• High mechanical strength. This is especially true of products from natural wood, from which dobori most often do.
• The slats installed on the slopes additionally strengthen the door frame, preventing its loosening or warping.
• Versatility. The holes are now available in various thicknesses and widths, which makes it possible to use them for finishing practically any types of slopes. This is especially true of telescopic models that can be stitched together like wooden lining.
• A variety of designs. Designs are made of various materials that are designed for certain style directions.

Installing door doborov involves fixing them to the wall.This process is relatively simple and can be performed in several basic ways:

• Mounting directly when installing the door frame. At the same time, the finishing board is attached directly to the door frame. Various methods can be used for this. The easiest option is to knock them together using an inner board that attaches to the box and the box. It is important when aligning to align the plane of both elements to get a flat surface. But if the slopes have significant drops, then without certain skills it will be difficult to fit the elements very smoothly with minimal damage.

• Installation after fixing the door leaf. Here the main difficulty is the measurement process. You need to get the exact parameters of the board, which is then attached to the wall itself with the help of various options.

To hide the joint between the box and the dobor, a thorn-groove joint is cut out at their ends. In this case, the board goes inside the door frame, which hides it under itself. This option is more common as it allows you to get a beautiful and decorative surface.

Similar grooves today are supplemented by the drawings themselves at each of the ends. This allows you to combine them into a more aesthetic system. But for metal doors it is impossible to make a similar connection after installing the box. This is due to the fact that it is technically unrealistic to form a groove in the metal using a router.

Dobora are ordinary strips or boards that perform a decorative function. Therefore, you can make them yourself from a variety of materials. Often they are formed from natural boards of small thickness or sheet products (chipboard, plywood, etc.).

The process of making dobor at home can be divided into several successive stages:

• Initially, measurements of the opening are performed. It is important to measure the slopes in different places to eliminate inaccuracies in dimensions. This procedure should be carried out for each side of the slope separately.
• Based on the data obtained, a blank should be made. To do this, apply the dimensions of the future dobor on the board. Please note that it is best to provide a small margin so that after installation no gaps form at the joints.When the markup is ready, the board is cut for finishing. Such operations are best performed using a circular saw, as it will provide a more even and high-quality cut.
• The procedure is completed by fitting and finishing dobor. If the board is slightly larger, then the ends should be leveled using an electric planer. To give you a unique design, the wood should be sanded and painted with stain or varnish. If laminated chipboard is used, then you need to take care of closing the ends with special tapes. They are glued to the material with an iron or a special dryer.

Installation of door dobor is a simple operation that, with a certain desire, can be performed independently. But before you install these items, it is advisable to read the instructions for their attachment. This will allow you to deliver them much faster and better.

Installation of dobor - the operation demanding the minimum quantity of skills.But to get a quality result, you should use an auxiliary tool, including:

• Hand or circular saw. The best option would be a Bulgarian with a special circle on a tree or jigsaw. It is advisable to use saws with small teeth in order to get a smooth joint without burrs.
• Milling machine. With its help, grooves are formed for docking the box and the additional board. Please note that installation can be carried out without this operation. But to get accurate and inconspicuous ends without it is impossible.
• Clamps These mechanisms are used to fix the grinder to the chair. This will allow you to get a mini circular saw, which will make it easier to trim the hole in the right place.
• Pencil and a long line.

Installation of dobori always begins with measuring the thickness of the wall. This parameter determines the type and quantity of consumables.

You can calculate dobora using this simple algorithm:

• Initially, you need to get the width of free space on the wall near the box.Measurements are carried out using a ruler or a corner. The latter option is more accurate, as it is necessary to take into account the angle between the frame of the door and the board. The width is desirable to know around the perimeter of the opening.
• The next step is to measure the thickness of the door frame. This is necessary in order to select the appropriate type, under which you will need to enclose the minimum number of supporting elements.
• Completes the procedure of calculating the number of dobor. This takes into account not only the width of the board and the opening, but also their height. It is desirable to take these parameters with a small margin, so that you can then adjust the canvas to the dimensions of the opening. Please note that all stock sizes on the market are standard sizes. Therefore, you should choose to focus on them.

Dobora is a factory-type product that is manufactured with certain technical parameters. But no one bothers to replace the finished products with materials at hand that each owner will have:

• Board from the array. The best option for making dobor. The material perfectly withstands high loadsand also differs in durability and durability. At the same time it is possible to use various wood species for the manufacture of the structure. This will allow the end product to be adapted to the style of the box and door leaf.
• MDF. Products made from wood chips, which is used for the manufacture of doors. Sheets of this material are also great for finishing. But the substance is very poorly resists moisture, so these elements can only be installed indoors with minimal humidity.
• Chipboard and hardboard. Sheets of wood waste, which can be adapted for dobory. It is quite easy to work with them, but at the same time they are also afraid of humidity, which limits their use.
• Plywood. There are several types of such a substance that is moisture resistant. Plywood - this is the best option for the manufacture of dobori, as it has the optimal ratio of price and quality.

There are situations when the width of one standard dobor is not enough to close the doorway.The solution to this problem is only to increase the canvas.

This process consists of several consecutive steps:

• Initially, additional boards are installed near the box itself. It is important to accurately and accurately fix them.
• After that, they are applied a second row of material that will protrude a little beyond the edge of the wall. This will allow you to mark up the entire length of the board. An alternative option is to measure an open piece of a slope with the subsequent transfer of dimensions to a new workpiece.
• When the marking is done, you need to saw off the dobor. Please note that cutting is performed only from the side that does not fit in with the previous board. This is important when telescopic types of coatings are used for extension, since they are initially equipped with slotted connections.

When direct feeds are used, the side of their trimming does not matter. The main thing is that when joining they form a minimum gap.

The algorithm for installing dobori consists of such sequential actions:

• Initially, all measurements are performed and the dimensions of all elements are adjusted.It is important that the joints of the boards were with minimal gaps, as this will not only not be beautiful, but also lead to the formation of drafts.
• At this stage, the board is fitted to the wall. This process involves aligning it in the same plane with the door frame. If the slope is uneven, then for this purpose, under the fence, enclose wooden planks of various thickness. They should be attached to the wall with screws and dowels.

When the slopes are at an angle, then it is advisable not to align them parallel to the box, but to form with a slight bias. The angle should be the same on both sides of the opening.

• The procedure ends with the mounting and finishing of the panels. To close the ends, from the outside have platbands, which are also made from the same material.

Mounting dobor is one of the important stages of the entire installation process. This procedure is performed in several basic ways:

• Unstuck. This approach involves the use of polyurethane foam as a web retainer. To do this, the finishing board is aligned along the entire slope, and then foam is poured into the gap between it and the wall.It seizes well with almost any substance and forms a durable bond. This approach is one of the simplest and is used by many experts.
• Fastener. Fixing the board occurs with the help of nails or screws. If the wall is made of brick or other dense material, before inserting the additional layer, it is necessary to form the holes for the dowels. After screwing screws, it is desirable to decorate these places with special inserts. If the holes were made of improvised material, then they can be additionally sheathed with special films or decorative strips.

Dobora can complement the door, as well as be an interior decoration, for example, as in these examples.

The large double door from the array with glass inserts looks great thanks to the wooden door panels and panels. Everything is made in the same style and looks very solid.

And here everything is normal, standard - and dobory, and doors. However, they play the role of a single “ensemble” in the interior, and the walls, the ceiling and the floor help them in this.

Another version of the door is made of a dark solid wood, but this time the dobor plays the role of the decoration of a tambour.The doorway turned out to be rather strict, but very beautiful, especially since a small sculpture was successfully placed next to it.

From the video below you can learn how to install the door panels on your own.