Paint for metal doors

 Paint for metal doors

Each owner of an apartment or private house is faced with the task of updating the appearance of the front door. One of the easiest and best options is to color the product. Fortunately, modern manufacturers produce many compounds that can be used for these purposes.

But first you need to familiarize yourself with the features and benefits of colors for metal doors.

Benefits

Before considering the features of coloring compositions, it is necessary to become familiar with the main advantages of the method of painting metal doors. The first advantage of this method of updating the input design is the minimum cost.All you need to work - the right paint and tools for its application.

Covering the surface with a new composition will be much cheaper than purchasing a new model. In addition, the door will be reliably protected from various influences from weather conditions.

But in order to achieve such results, you must seriously come to the choice of paint for the iron fabric. In the opposite case, the coating will lose its original appearance and, moreover, will not provide adequate protection for the structure.

It is worth paying attention to the fact that the right paint is able to fill the voids that are in the material of the metal door. This will improve not only the appearance of the structure, but also its heat-insulating qualities.

Many modern dye compositions contain components that prevent the development of corrosion.

This is quite an important factor, since it is known that under the influence of increased moisture the metal loses its properties.

What can be painted at home?

You can independently update the appearance of a metal door without seeking the help of specialists.But for this it is necessary to choose the right composition for coloring, as was mentioned earlier. There are many different tools, the advantages and disadvantages of which are worth a closer look.

  • One of the most popular options among buyers is acrylic water-based paint. The peculiarity of these compounds is that they do not contain toxic substances. In addition, acrylic paint dries pretty quickly, after the end of the process there is no unpleasant smell. The compositions are simple and easy to apply. But It is worth noting that acrylic tools are rarely used to paint the front door in a private house.

Most often, the compositions are used to create interior decoration.

  • Also for processing the inside of the front door can be used nitrocellulose substances. It is worth paying attention to the fact that these paints have poor resistance to the effects of chemical and thermal type.
  • Quite often used hammer enamel for the front door. This is due to the fact that the compositions have excellent resistance to different types of effects.Hammer enamels provide metal structures with an attractive appearance. Compared to many variants, this coating is durable. The main advantage of hammer enamel is that it can be applied in different ways. The composition dries quickly, before painting it is not necessary to prepare the surface.

Metal structures covered with hammer enamel, have excellent resistance to mechanical stress.

  • The best and most reliable option is powder paint. The main advantages of these compositions include the following:
  1. affordable cost;
  2. paints provide an attractive appearance;
  3. compositions for a long time retain their color.

As for the shortcomings, they are also available. Powder formulations are almost impossible to use at home for the treatment of metal surfaces. This is due to the fact that funds need high-temperature chambers.

  • Another good option for machining metal surfaces is forge paint. The coating is resistant to different types of exposure.But you can buy such a tool only at specialized sales outlets.
  • Another option for door painting is epoxy enamel. These funds belong to the group of two-component compositions. But epoxy enamels are rarely used due to difficulty in application. When using, you must select the correct ratio of components, pre-prepare the door. Another difficulty is the use of hot drying.
  • For processing doors that are constantly influenced by weather alkyd enamel. For these compositions apply different versions of the basics, which makes it possible to choose the most suitable option. But you should pay attention to such an important feature as the use of highly toxic components in the composition. Despite this, the alkyd coating has some significant advantages.

These paints form a durable film, characterized by good elasticity. Alkyd compounds protect metal sheets from corrosion well.

Thanks to reliable coating, the structures withstand strong temperature differences.

How to choose?

When choosing paint for metal door processing, it is necessary to take into account several important factors. It should be understood that each specific composition has its own advantages and disadvantages. Therefore, it is necessary to choose the means in accordance with some significant factors.

It is necessary to take into account the type of surface on which the paint will be applied. For example, some compounds are distributed directly on the metal.

Sometimes the paint is applied to the old layer. But acrylic paint should not be used for applying on the old coating, because after a short time it will begin to peel off. The same moment applies to nitro enamel, through which the old layer will be visible.

If you decide to independently update the appearance of the door from the street at home, refer to the simplest option - the use of spray paint in a can. Fortunately, modern manufacturers offer many of these options in different colors and at affordable prices. To fix the paint layer, you can use acrylic lacquer in a can.

It is worth noting that such compositions are suitable even for the Chinese door.Such designs are quite difficult to paint, as noted by many experts.

Stencils will help to improve the updated look of the door.

With such simple products, simple patterns and complex patterns can be applied to a metal surface.

Special attention during the purchase of paint should be paid to the manufacturer. It is best to buy formulations in specialized sales outlets to avoid low-quality fakes. Today there are so-called color-studios in which the wide range of paints is presented. These stores provide customers with quality assurance and all necessary certificates.

High demand among buyers use goods from the company Tikkurila. Means possess excellent resistance to wear and reliability. The paints from this company are suitable for both outdoor entrance construction and the door to the apartment.

The compositions can even be applied to rust without resorting to pre-treatment.

Application details

To achieve a successful result of staining, you must first familiarize yourself with some of the subtleties of this process.It is best to prepare the surface for further manipulations so that the coating lies reliably and evenly on the metal sheet.

First you need to remove the fittings and decorative elements from the door.

After that, the canvas is carefully cleaned with emery paper. The old layer is removed from the metal construction, it is relieved of rust. Before painting the door must be thoroughly washed, cleaned of plaster.

Surface degreasing is the final stage of the preparatory process. This work is carried out with the help of special formulations.

To paint the door with your own hands at home, you need to adhere to a certain phasing in the work.

It is necessary to start the process from the top of the metal structure. First you need to do the processing panel, then proceed to the horizontal surfaces. Then you can begin to paint the vertical elements. The whole process must be carried out at a fast pace so that the paint does not have time to dry. Layers should be applied evenly and exclusively on a dry cloth.

It is worth noting that there are several options for painting a metal door.The first method is to use an aerosol, as mentioned above.

Basically, this method is used to process a large area.

The second option is to use a roller. With this tool you can quickly and easily distribute the paint. But note that hard-to-reach areas will have to be brushed.

So that the process of coloring does not take a lot of time, it is necessary to provide several nuances even before the start of work. For example, to protect the surrounding elements is best to use a film. So that the paint does not get on your skin, be sure to follow the process in overalls. Buy protective elements for hands and face in advance.

Quite often, when self-staining, people are faced with such a problem as the formation of traces of paint on the pen.

The usual solvent will help to cope with this problem.

Examples and options

Successfully painted metal door is able to decorate the facade of any private house. Particular attention should be paid to the color used to paint the entrance structure. One of the universal options is the brown door. It fits perfectly into the facade of any home.

The entrance designs painted by means of a powder dusting look well. But it should be understood that it will not be possible to process the door with this method at home.

You can also choose the classic colors - white or black. But in this case it is necessary to take into account the peculiarities of the facade design. The door should look harmoniously with windows and exterior walls.

How does the powder painting of metal doors, you can learn from the video below.

Comments
 Author
Information provided for reference purposes. For construction issues, always consult a specialist.

Entrance hall

Living room

Bedroom