The warmed entrance doors for the private house

 The warmed entrance doors for the private house

Home protection is the primary task of any family. It is especially important to secure a country house, because, unlike an apartment, it is more vulnerable to weather conditions and illegal penetrations. For this you need to install a good entrance door with insulation, which will have a number of positive qualities. And in order not to be mistaken with the choice, it is necessary to take into account both the advice of professionals and reviews of real buyers.

Special features

Insulated entrance structures for private houses should have improved performance than standard doors for city apartments.Their main task is to protect the home, so they are characterized by high strength, reliability and durability.

Inside the door structure is a heat-insulating filler, which is characterized by high heat resistance and sound insulation. Depending on the material of the filler, the door leaf for the street will have different performance indicators.

Outdoor panels are usually treated with a special tool that can protect the surface from the harmful effects of the environment. This treatment improves the external properties of the web, which minimizes the formation of any damage on it.

Metal structures are considered to be of the highest quality, they are less susceptible to moisture and fire and have high strength. You can not say about wood products.

Street doors for a country house can consist of steel sheets. The frame is most often made of a bent profile, but there is a frame of a profile tube. Bent profile is used to increase durability, and profile pipes are used to create non-standard panels.Sometimes a corner is used in production, which is not distinguished by positive properties, but has a low price.

The service life of the entrance door depends on the set of horizontal and vertical stiffeners. The heavier and heavier the canvas, the faster it will bend the loops and take an asymmetrical position.

Another important feature of exterior structures with insulation is the ability not to deteriorate under the regular influence of a moist environment. This ability is made possible by the fact that the surface of the product is covered with a water-repellent compound.

Kinds

It is possible to warm a street door a set of various materials. All of them have certain advantages and disadvantages, so you should learn more about each type of insulation. The door, which is constantly in contact with the external environment, needs a special filler that can withstand constant humidity and temperature extremes.

  • One of the most popular heaters is mineral woolbut it is not able to withstand moisture. Wetting, it becomes heavier and sags, and freezes in cold weather. For this reason, it is not advisable to use mineral wool to insulate metal structures that produce condensate in the cold.If this filler fills the void of the door, then it must be in the vapor barrier, which ventilates the air flow and protects the wool from moisture. A polyethylene film can be used as a vapor barrier.
  • One of the best materials is polyurethane foamHe is foamed polyurethane. Its main advantage lies in the ability to perfectly close all the cracks even in hard-to-reach places. In the solid state, polyurethane has the properties that are necessary for insulation of the outer door. It does not get wet, does not burn and does not release heat. Moreover, it is easy and simple to work with such material, and its price has acceptable numbers.
  • For insulation of wooden and metal structures is often used. heat reflective filler. It is a mounting foam covered with a thin layer of heat reflector. At first glance, this material does not inspire confidence because of its small thickness, but it is able not to let the warm air out of the living space onto the street. Heat reflecting filler can be used to insulate the door from one or both sides.Modern types are equipped with self-adhesive surface, which facilitates the process of warming.
  • Warm and light material batting may have a cotton or wool blend structure. It is able to easily absorb and evaporate water, and also has good ventilation properties. Batting isolates the room from extraneous noise and keeps the heat inside the house.

The minus of the material is serious enough - it is soaking wet, it adds a lot of weight.

  • Often used for door insulation felt materialproduced in the form of cloth. Felt is an environmentally friendly and heat-conducting raw material that is resistant to abrasion. But it is prone to swelling when moisture gets on it, which significantly increases its weight.
  • Adhesive insulation - it is a tape that can be made of foam, rubber or polyethylene foam base. Insulating tape is necessary to close all cracks and gaps, moreover, it does not change its performance properties under the influence of external factors.

Despite the mass of positive qualities, this heater is not very durable and only serves a certain period.

  • Cheap and high quality canvas can warm Styrofoam. It is easy to install, and it does not require any additional investments. It has a low thermal conductivity and good sound insulation, which is necessary for the entrance door. But the foam is extremely unstable to fire, besides, during combustion, it evaporates toxic substances that are dangerous to human health.
  • Corrugated cardboard, it is cellular filler, is one of the cheapest and ineffective insulation. It does not have high performance, and therefore undesirable for use in street canvas.
  • Good enough insulation is synthetic winterizer. Due to its structure, it is able to retain its shape for quite a long time. It does not absorb moisture and is able to withstand different temperature extremes. But this material is easy to ignite, which reduces its positive properties.

Many other materials can be used to insulate the outer structure, but a combination of several fillers is necessary to achieve the best effect.

Which option is better?

Entrance doors for a private house should protect the home not only from hacking, but also from drafts and noise. Therefore, it is important to choose a design with good filler.The main requirement for filler and upholstery is safety for living beings. They must be waterproof, soundproof, heat-resistant and durable.

In addition, the location of the door frame is also important. So, the street doors in the first place should have a low thermal conductivity, and only then all the other qualities. The outer panel upholstery is also important. It can be upholstered with leatherette, felt or genuine leather. From the upholstery also depends on the durability and practicality of the product.

Insulation for exterior structures may vary in price. The cost of materials depends on the quality of the product, so the higher the price, the better the filler. The cheapest options for such materials are corrugated cardboard, sintepon and foam rubber. They do not have high performance, and therefore are not suitable for installation in external structures.

In the middle price category is izolon, foam and polypropylene plates. They have improved characteristics, but can be used for installation in outdoor canvases only in combination with other materials.

The highest price and the best quality is polyurethane foam and mineral wool. Both fillers have good sound insulation and low thermal conductivity. But it is necessary to give preference to doors with mineral wool than with polyurethane foam structures, since they have lower thermal conductivity.

Assessing the quality of all materials suitable for insulating the input panels, it is worth considering their disadvantages. For example, mineral wool must be inside the frame, otherwise it will settle over time. Polyurethane foam is prone to fire, and the synthetic winterizer and foam can suffer from condensation on the inside of the door. Therefore, they can only be used in combination with more resistant materials.

How to choose?

A good front door for a private house is distinguished by durability, reliability and durability. Unlike apartment construction, it is more susceptible to the influence of the external environment, and therefore needs additional protection.

When choosing a street canvas, first of all, you need to pay attention to its safety, thermal insulation and lining.

  • Security - the door unit can have one of three safety classes.The third class is the most durable and reliable, while the first class is easy and simple for the ordinary person to open. The higher the class, the more massive the canvas. To install such a door, it is necessary to concrete the box, which will significantly complicate the probable breaking of the door.
  • Thermal insulation - an important point, especially for a metal entrance door. It is peculiar to metal to freeze, which leads to the formation of frost and condensate. Therefore, it is important to install thermal insulation rollers both inside and outside the panel. You can use the insert of polyamide. To solve the problem of heat transfer can electric heating of the structure, which consumes a little electricity.
  • Facing - should consist of frost-resistant components. It is desirable to equip the canvas with a warmed substrate that will add reliability to the product. Best of all at the entrance to a private house looks massive wooden structure. Good looking deaf doors with glass or forged elements.

Residents of country houses believe that the entrance is better to pick up the iron structure.

The tree is characterized by swelling and deformation. However, in a few years the wooden floor will need restoration, while steel can stand for decades without major repairs.

How to warm?

It is possible to warm a cloth by means of a sealant which closes all gaps between a cloth and a box. He will keep the heat indoors and will not let it out. To mount the gasket, you will need a rubber profile on the adhesive tape. It is necessary to sheathe the structure around the perimeter, having previously calculated its dimensions. To glue the rubber profile, you must remove the protective film from it and fix it on the seam.

The easiest way to sheathe a wooden panel with their own hands heat insulating material. To do this, remove the product from the hinges and remove all fittings from it. Attach insulation can be on glue, nails or paper clips. All this should be done so that there is a place around the perimeter and in the middle for fixing the next layer. Having laid a heat-reflecting filler, it is necessary to close it with a decorative coating in order to add to the product presentability.

The hardest thing to warm the door leaf foam. To do this, cut the parts around the perimeter of the product, cover them with finishing material and fix it with glue. You can beat the perimeter of the cloth with slats that are the same thickness as the foam.Putting foam pieces, you need to beat them with clapboard.

If it is not possible to remove the door leaf, or it is very difficult to sheathe the product yourself, then you can use the lightweight option - to sheathe the box with dermatin rollers, inside of which there is insulating material. When performing installation work, it is worth remembering that the rollers need to be fixed with the side on which they are bent in half. In this case, you need to press them close to the surface of the door. Glue the rollers on the lower threshold is not worth it, here they will very quickly become worthless. It is better to fix the leatherette at the bottom of the canvas.

Getting to the independent weatherization of the door, you need to prepare all the necessary tools. The main set includes: glue, small nails, scissors, a special knife and a hammer. Depending on the method of insulation and plating prepared additional tools.

It is necessary to do everything as carefully as possible so that the filler lies in an even layer and covers the entire surface of the canvas.

For information on how to insulate the front door, see this video.

Comments
 Author
Information provided for reference purposes. For construction issues, always consult a specialist.

Entrance hall

Living room

Bedroom