Sectional doors Alutech: the pros and cons

The fence can not be continuous; It is necessary to provide passageways and driveways for transport. To organize them, there is an excellent solution - sectional doors. But it is necessary to study their specifics and key features well, otherwise you can make a number of serious mistakes.

Sectional doors are common in European countries very widely, and the reason for this is their objective advantages over alternative solutions. Structurally, such products are formed by panels connected with the help of loops, moving along special tires. When the passage opens, the blocks alternately become directly at the ceiling, which allows you to free up a maximum of the adjacent territory.

These are properties common to all sectional structures in general, but Alutech did not consider it necessary to dwell on this level.

The developers of the company have made every effort to make their product truly universal. It is possible to install doors manufactured by the company in a residential building and at an industrial facility, in a car fleet and a commercial car service, at the exit of an underground garage.

Designed, combined with the appearance of absolutely any buildings. All models can be controlled manually, many versions are supplemented with infrastructure for sending commands from the guard post or remote control.

If you want, the drive will be supplemented with automatic control means; even if there is no electricity in the network, the system unlock function is always available. Initially, the entrance complex is designed at the rate of 25,000 ups and downs; but even when 10 years have passed, it will be enough to change the springs to restore the device’s previous performance.

Alutech lifting gates are made from high-grade steel sheets, which are processed using a special technology and provide maximum resistance to external influences.For internal filling polyurethane foam is used that does not pose a threat to humans and the environment.

Standard products are covered with a special embossing, not only imitating the wood texture, but also reliably masking the inevitable small scratches.

Even if the gate is inserted, the panels retain the function of self-centering, there will be no gap between them. This is very important during installation, as well as the fact that the developers took care of equipping the structures with ready-made holes for parts.

Sectional doors are completely covered with rubber seal, sealing the opening is preserved in any situation. Even a very strong wind or a powerful blow is not able to disable the entrance complex. All components, including the handle, can be made of materials with a low level of corrosion, can work as long as possible at high humidity.

Sandwich panels and hinges are formed in such a way that, even under the most unlikely circumstances, to eliminate the risk of injury. A special device is used to prevent the breakage of springs. Dimensions are always determined individually, but the step from standard values ​​is exactly 0.5 cm. Standardized sizes (always available) are 13. The drive can be set to the most various modifications, ensuring wide compatibility.

Alutech produces two groups of gates: “Classic” (for respectable customers) and “Trend” (for those who want to save money and, moreover, get normal quality). In the first collection used panels with a thickness of 4.5 cm, and components are made of stainless steel. Such products can be safely installed even in the polar regions, they are guaranteed to endure the impact of the hurricane wind.

Western European concerns may offer a similar quality, but their fee for automatic entrance complexes of this level is much higher.

The Trend line is made on the basis of 4 cm panels; this is the optimal solution for a garage located in a temperate continental climate.All major parts are made of steel with zinc coating. The wind of 40 m / s will not transfer the product, but they are not afraid of very strong gusts. Such properties are not achieved by weighting the structure, but by reliably sealing it with polyurethane foam. The quality is higher than that of similar gates made in the Russian Federation, and with the automation, things are better.

The supplied lock is rammed, deadbolt deadbolt. Closing and opening is possible only with the original key; in all variants, the gate can be locked, unlocked both inside and outside. The locking device is inserted as securely as possible. The designers of Alutech refused from the solid canvas, they preferred to divide it into stand-alone panels. This solution allowed to drastically increase the strength compared to monolithic versions.

Alutech engineers prudently added a counterweight to the design, thanks to which the opening is easy and quick. The course of plowing, rigidly vertical, provides free access and a close approach. The assembly with the participation of professionals occurs as quickly and reliably as possible.

When ordering, you can always limit yourself to measuring the height and width of the openings - these data are enough to determine the final price and send a specialist to determine the size. If at this stage there are any misunderstandings, difficulties, immediately refuse to cooperate with a questionable company - this is very risky.

If you are going to save money, you should purchase the Alutechx gate painted in one of the 13 typical keys; Surcharge allows you to get more than two hundred coloring options. Additional possibilities for both saving and expanding the functionality are provided by the choice of electric drive of various cost; The company cooperates with many leading manufacturers of such components.

Pay attention to the wicket threshold. If it is flattened, it will be easier to walk and move heavy loads, this is an ideal option for shopping centers and organizations. But higher thresholds (10 and 14.5 cm) will increase the strength of the gate and stop the ingress of moisture in the garages. If you want to ensure the maximum luminous flux, order the section not from sandwich panels, but on the basis of an aluminum profile.

Typical installation scheme is the same in buildings with virtually any ceiling height; There are also options suitable for low hinges and for the highest possible openings. Consider that the “Trend” type doors, not to mention the Classic group, are very susceptible to strikes directly on the canvas. To mount even ready-made kits, it’s not always possible to arrange rollers and springs correctly.

It is necessary to balance a cloth by means of the torsion shaft. It is necessary to take into account that the gates of the Trend group do not allow a high installation, for them only standard and understated installation are provided. Regardless of the series, adjustment during installation requires leaving at the top of the opening 0.3 m and sides of it at 0.45 m (keep this in mind when you are ready for work or call installers). Balancing springs should be fixed so that the level of stretching of the cables is normal - without relaxation and excessive tension.

When used on the path of the gate, there should not be the slightest obstacle (s), even much softer than the canvas itself.When opening or locking, they first close (open) the lock, and only then the panels themselves begin to move.

The gates of Alutech are valued by consumers as good and modern products. Clear instructions for installation, as claimed by users, make it easy to install these structures even for not very experienced people, and even in buildings with a sloping roof.

Garage doors from Alutech are no worse than installed on other objects; moreover, some people point out that they are becoming more technological. Fittings do not cause complaints, works reliably (subject to the rules of use). In addition, repair and maintenance in recent years have become much better and faster. The quality of metal and other construction materials meets even the most stringent requirements. The calculation of springs and other components is considered very accurate.

To program electronic components, judging by consumer reviews, is much easier than in products from other manufacturers. The quality standard (GOST) is observed in relation to all components of the product, complaints about the outgoing seal and loss of strength can not be found.The gaps separating any panel from the next details, keep invariably provided size for years.

The false panel, designed to increase the height of the installation, for all customers stands exactly on the place reserved for it by the designers. And the built-in version of the gate looks beautiful, reliable (it serves for many years), it is made no worse than at other leading enterprises.

Thus, the sectional doors of Alutech Corporation can be safely recommended for any garages, houses and production facilities: they will precisely fulfill their task and meet all your expectations.

The number of options for the design of the gate Alutech is very large.

Here is just one of them - the stylish descending design of wood color in the middle of the brick walls looks very original.

This photo allows you to make sure that the dark solution on the background of light silicate bricks also looks attractive.

And here they obviously had a bold color experiment: the blue gates surrounded by light yellow hues perfectly harmonize with the blue roof.

And most importantly, all copies are impeccably reliable.

Pros and cons of sectional doors Alutech, see the following video.