Features of the metal base for the bed

The base for the bed is like a foundation for the house: nothing superfluous, only that which guarantees the safety of the whole structure. It is especially important to consider how the mattress will fall on it, because the health of a sleeping person directly depends on it. In this article we will talk about the features of metal bases for beds.

Pros and cons of design

The metal base has a number of indisputable advantages over analogues:

  • Durability. Service life reaches 30 years.
  • Strength.
  • Wear resistance.
  • Environmental Safety.
  • In the manufacture of used corrosion-resistant steel, which increases the service life and corrosion resistance of the product.
  • Moisture resistance.
  • Incombustible.

There are also disadvantages:

  • The metal is pretty heavy.
  • Labor-intensive assembly.

But, despite some negative nuances, the beds of this foundation are very popular all over the world.

Types of metal bases

Bases for beds can be divided by dimension:

  • 140x200 cm - for single beds;
  • 160x200 and 180x200 cm - for double;
  • 90x190 cm - for children's single beds.

Also, bases are divided into several types according to their design.

Solid

Available with or without legs. It is the optimal solution for almost any type of mattress, with the exception of orthopedic. But today it is not very popular.

In the absence of legs, the base should not change its horizontal orientation. The mattress is chosen exactly at the same height as the base.

The advantages of this type of base:

  1. The simplicity of the iron construction.
  2. Low cost.
  3. The stability of the structure with a large area (140x200 cm or 180x200 cm).
  4. Prevention and treatment of diseases of the back.

Of the negative aspects are the following positions:

  • Lack of ventilation mattress.
  • Moisture accumulation.
  • Be sure to constant airing and turning.
  • If defects are found, the mattress will need to be replaced.
  • It makes no sense to use orthopedic mattresses due to partial loss of their properties.

Orthopedic or lath

Its usual dimensions are 160x200 cm. It is easily combined with an orthopedic mattress and is the most common configuration of a metal base for a berth.

With the help of lato-holders made of metal, plastic or rubber, the lamellae are mounted on the base in such a way that the distance between them is maintained no more than the width of the rail. This method of attachment gives more cushioning lamellas.

Note that the number of slats for a double bed varies from 30 pieces, for a single bed - no less than 15. The greater their number, the stronger the basis of the furniture.

Positive properties of the orthopedic base:

  1. Improving the therapeutic properties and service life when combining the orthopedic properties of the mattress and the base.
  2. Ventilated space.
  3. Resistance to external influences.
  4. Flexibility.
  5. Uniform weight distribution of a sleeping person.
  6. Increased amortization of the bed, which guarantees a good and healthy sleep.

Negative moments when using this design:

  • The complexity of the assembly.The product is quite complex, if improperly assembled, the probability of breakage is high, which will additionally hit the family budget.
  • Relatively high cost.
  • The loss of elasticity of the rails after some time of operation.
  • Loosen anchorages.
  • Incorrect fastener lamellae to the frame leads to the creaking of the structure.
  • Hard fixation of the slats will lead to partial loss of the anatomical qualities of the structure.

Mesh

Metal mesh - a kind of armored base. It is a twisted springs, fixed in the base of the bed around the perimeter. Fastening occurs with the help of mounting on the ledges of the backs of the bed. Used with mattresses with latex or spring filling.

Plastic base

This design of the base is made on plastic supports with spring elements. This creates an orthopedic effect.

From the positive qualities of this design, it is worth noting the following positions:

  1. Excellent elasticity.
  2. Adjust the degree of stiffness.
  3. Strength.
  4. Long service life.
  5. Equipped with electric drive and control panel.

We add that the cost of this design is quite high,and the lower part of the mattress is practically not ventilated.

With lifting mechanism

Select another category of metal base - with a lifting mechanism. A distinctive feature of this design is the possibility of lifting the head. This is a very comfortable and at the same time popular design basis for a berth. Used in hospitals to maintain the upright position of a sick patient. The construct is equipped with a manual lift, electric drive with a control panel.

Tips for choosing

Below we offer our readers to familiarize themselves with some tips that will help you choose the right base for the bed:

  • Pay attention to the design: it is whole or team.
  • It is necessary to consider the type of metal.
  • Functionality.
  • When it comes to orthopedic foundations, it doesn’t stop me from learning about the number and dimensions of the latoflexes.
  • The base of the lamellae is the ideal solution for those who appreciate a peaceful and deep sleep.
  • Pay attention to the dimensions of the slats: the length should be increased in relation to the mattress by 4 centimeters.
  • If there is a spring block, buyers should be aware that the distance from the rail to the rail should not be greater than the diameter of the fastener (spring).
  • Constructive with wide slats should be equipped with springless mattresses or mattresses with dependent springs.
  • When using the transformation function is not recommended to use mattresses of coconut coir. Otherwise, the filler will be deformed.
  • We recommend choosing a product with legs.

See further review of the bed "Athena" with a metal base and wooden legs.

Comments
 Author
Information provided for reference purposes. For construction issues, always consult a specialist.

Entrance hall

Living room

Bedroom