Tytan foam: types and specifications

During construction work, everyone tries to choose the best materials, because they guarantee the construction of quality and durability. These requirements are also applied to the installation foam. Many experienced builders advise you to use Tytan's professional foam foam, which originated in the United States and eventually gained worldwide popularity. Due to the use of modern technologies, the quality of products always remains at a high level, and because of the large number of branches in many countries, the price is stable and quite acceptable.

Considering the basic parameters, it is necessary to remember that they are common to the entire range of Tytan foam:

• Able to withstand temperatures from -55 to + 100 degrees in a frozen form.
• The formation of the initial film begins 10 minutes after application.
• Cutting the curing foam can be an hour after application.
• For full solidification, you must wait 24 hours.
• The average volume of a 750 ml bottle in the finished form is about 40-50 liters.

• It stiffens under the influence of moisture.
• Foam is resistant to water, mold and fungi, so it can be used when working in damp and warm rooms: baths, saunas or bathrooms.
• High degree of adhesion with almost all surfaces.
• The frozen mass has high rates of thermal and sound insulation.
• Evaporation is safe for nature and the ozone layer.
• When working, avoid inhaling large amounts of gas; it is best to use personal protective equipment.

The popularity of this foam is due to the fact that it can be used for various surfaces: wood, concrete, plaster or brick. Given the high quality, many experienced builders use Tytan for the following types of work:

• window frames;
• doorways;
• various building compounds;
• when sealing cavities;

• to improve thermal insulation;
• for additional sound insulation;
• when gluing tiles;
• for works with various pipes;
• at assembly of various wooden designs.

When buying foam, you need to decide in advance on the scope of work that needs to be done. It is also best to roughly calculate the amount of material that will be needed. The line of mounting foams of the Tytan company is represented by a wide range of products for various types of work. All products can be divided into three main groups:

• Single component formulations are sold with a plastic applicator, due to which there is no need to buy a gun.
• Professional formulations are designated Tytan Professional. Cylinders are prepared to work with a gun.
• Compositions of special purpose are used in individual cases when it is necessary to obtain any specific properties from the frozen foam.

Tytan Professional 65 and Tytan Professional 65 Ice (winter) - one of the most common options. In addition to a large number of finished foam, you can select a few distinctive properties:

• convenience of use (the cylinder is prepared for the use of a pistol);
• has high sound insulation - up to 60 dB;
• used at positive temperatures;
• possesses a high class of fire resistance;
• shelf life - one and a half years.

Tytan Professional Iсе 65 differs from many types of mounting foams in that it can be used at negative temperatures: with air indicators of -20 and cylinder -5. Thanks to the use of innovative technologies, even at such low temperatures for work, all properties remain at a high level:

• Capacity is about 50 liters at low temperatures, with air indicators of +20 ready-made foam it will be about 60-65 liters.
• Sound insulation - up to 50 dB.
• Preliminary processing is possible in an hour.
• There is a wide range of application temperatures: from -20 to +35.
• It has a middle class fire resistance.

When working with Tytan 65, it is necessary to clean the surface of ice and moisture, otherwise the foam will not fill the whole space and lose all the basic properties. The product can easily withstand temperatures up to -40, so it can be used for outdoor work in the middle lane or more southern territories.

After applying the foam, you must remember that it will collapse when exposed to direct sunlight, so it must be applied between building materials or painted over after it has completely set.

The use of professional Tytan 65 foam makes it possible to achieve excellent results: one cylinder will fill a large volume, and the use of a special Tytan Professional Ise compound allows you to work even at low temperatures.

For more information on TYTAN 65 foam, see the following video.