The functional role of the thermal head in the control system of the warm floor

How pleasant it is to walk on the warm floor in winter and not be afraid to freeze - this type of heating in the house where children grow up is especially important. The heat-insulated floor is a convenient alternative to classical or electric heating in the house. More recently, it was impossible to imagine something similar, but the technology quickly reached this point, because today such systems are available to everyone.

Underfloor heating is a self-installed heating system that provides living space with warm air. The device of uninterrupted work implies serious requirements both for installation of equipment and for operation. For the responsibility of uninterrupted heating of a water heated floor meets the thermal head. It is also a stable indicator of temperature that needs to be kept under control.

Proper mixing of hot and cold water should ideally match the sensor reading.

There are standards that include the degree of heating inside the system to 90 degrees, while the floor itself should not be higher than 40 degrees. The optimum recommended temperature is 22 degrees. Proper operation of the thermal head is the key to the smooth operation of the entire system.

Such heating has a number of indisputable advantages, among which cheap operation comes first. Heated floor heats the entire room compared to mounted electrical batteries, during operation of which the heated air rises, and the floor, in fact, remains cold.

Such a heating device does not disturb the balance of humidity in the room, which is also an undeniable advantage.

Heated floor does not have any critical flaws, but some nuances should still be taken into account. The complexity of installation imposes serious requirements on the preparation of the area. A serious inconvenience may be the leakage of the pipeline during operation, because in case of repair it is necessary to open the floor covering.Such a floor cannot be installed in hard-to-reach places (on the stairs or in small rooms), which requires additional heating equipment.

For stable heating of the floor temperature meets the thermal head, which is installed on the valve.

A conventional system includes pipes, thermal insulation, a thermal head with a sensor, fasteners, a welt tape, accessories to minimize seams, manifolds with fittings, and sometimes an additional pump group package. The operation of the heated floor is carried out in a mixing unit. When entering the heating system, the water mixes, thus achieving a certain level of temperature.

Thermal head and thermal valve are an integral element of the radiator heating mechanism. When the system is connected to the valve, the temperature readings come, which can be adjusted. Today, two-way and three-way valves are common. Thermal head and thermal valve - is the "heart" of a warm floor.

Installing a heated floor is troublesome and, as it may seem at first, expensive. However, afterwards, the benefits and benefits are obvious.As practice has shown, during operation such a system is cheaper and more practical than other types, but the installation will cost more than other systems. All costs will pay off, and in the end, the heating season will save up to 20%. It is better to entrust the installation of such a floor to qualified specialists, which can guarantee safety.

It is best to purchase a ready-made kit, which already includes all cranes and other necessary components. For different volumes of the area there are their own systems of laying, so the method of installing equipment for a small apartment is not suitable for a large house.

When properly installed, such a floor should not be visible under the parquet. It is worth considering that the more functions of the floor heating programming, the more expensive it will be. For example, for different rooms, you can choose, respectively, different temperatures.

When choosing a heating scheme, it is always necessary to consider the volume of the heated room.

In order to save under the cabinets, sofas and other types of furniture space is not warmed.

You need to carefully choose the material of the insulator, which depends on the durability of the system - foam panel and foam plastic are the most common options.

In case of non-compliance with the installation rules of the mechanism, incorrect operation or complete failure of the system is possible. As manufacturers say, with proper installation and operation of a warm floor can last up to 50 years to its owner, so it is important to approach such an acquisition thoroughly.

Numerous reviews suggest that the water heating system is popular because of its economy and availability. Among the factors and selection criteria, people emphasize safety compared to electrical systems.

Among the popular manufacturers are brands WOLF, ACV, VAILLANT, CTC. Pipes and other components on the market are offered by companies such as OVENTROP, WIRSBO, UNIVERSA, AQUATHERM and PURMO.

See the following video for the functional role of the thermal head in the control system for the warm floor.