LED pendant lights

If you need to qualitatively illuminate a large area of ​​a shopping center or institution, a large office, hotel, school or university room while saving, then LED pendant lights will be an ideal solution for this purpose. Switching to LED lamps in any room will be not only one of the most affordable ways to save energy, but also a good opportunity to protect the environment. Today you can find LED lamps of any shape and modification.

Special features

In the repair of domestic premises or office planning, lighting design will play an important role. For example, if you decide to make a suspended, plasterboard or stretch ceiling in your room, then the LED fixture will be the only right decision for the organization of lighting.Such a lamp, having a scattering angle of up to 180 °, is able to provide a soft, even light in the lobby, corridor, office or in any other place where you decide to apply it. The effect of flicker in this device is completely absent, that is, the load on the vision will not be. However, for general human health, LED pendant lamps for the ceiling are also absolutely safe, since they are made of environmentally friendly materials without the use of any harmful substances.

The incredibly thin body of the lamp and the elegant exterior design is able to decorate almost any interior. For arranging your own space with maximum comfort, you can install it, for example, in your bedroom or living room, which will allow you to make the most diverse and bold design solutions.

This lamp has a high energy efficiency, which can significantly reduce the cost of lighting. This is especially important when it comes to large retail or exhibition areas with a large number of built-in led lights.

In addition, the high operational life of the service of such a device for longyears will eliminate issues related to its replacement and maintenance, and, consequently, additional costs.

In any modern house, energy bills rank second, if not first, in terms of the amount. Therefore, the decision to purchase LED ceiling lights will not only significantly save on energy costs, but also meet all sanitary and environmental requirements. Such led-lamps do not emit ultraviolet radiation and do not contain mercury. You can also further save on the use of air conditioning systems in the summer, since the lamps do not emit any heat at all. The LED is more durable than any other light source. It is resistant to heat and cold, vibrations and shocks. Operating temperature is almost unlimited. In addition to domestic purposes, led-lamps can be used in office buildings and educational institutions, in warehouses, any production areas.

Suspended

LED pendant luminaire is recommended to be used only in rooms that have a sufficient area, as well as a high ceiling height.This is necessary because of the small design features of these models: they are installed only on suspensions or special cables. Therefore, the main direction of use of these devices is large premises, railway stations, airports, large warehouses, office centers, parking for cars.

It should be noted that the lamps for the ceiling on the cables or special suspensions can be used in the organization of high-quality lighting, for example, in houses or apartments of an apartment building. This is possible only under one condition - the size of the room must be appropriate. The ceiling height must be at least three meters.

Lamps on special cables for residential premises have a much more beautiful and original design. Most often they are single-lamp products, but sometimes they are represented by linear types.

These both options are mainly used for high-quality lighting of any area in the house, for example, a dining room.

Functional features

The design of products on the ropes to its users allows you to illuminate only the room, which has a ceiling sufficient for suspension height.If, under such conditions, standard overhead fixtures are used for the ceiling, then with the same light power it will be very small and it will be necessary to use products with greater intensity of light flow.

This is one of the reasons for creating hanging products for lighting.

The dimensions of some luminaries fully correspond to their luminescent counterparts, but of a linear type.

All suspensions in this design play another role - it is the fixture fixture. They are supplied to the luminaires with a power cable. The number of LEDs in different models can vary considerably. It all depends on the basic dimensions of the device and on what level of light flow is needed for sufficient illumination.

It is worth noting that in some models the probability of adjustment is provided. You can choose the intensity of the glow. It is necessary to pay attention to the fact that such linear ceiling lamps are located at a considerable height, and therefore the switching of all modes of operation is done remotely.

Much less often it is possible to meet models with the sensor which reacts to the movement.

Selection rules

If your plans include the installation of lighting devices on LEDs, then by all means consider the key parameters of the choice:

  • Power lamp. This characteristic is relevant for all types of devices.
  • The main luminous flux. This is another parameter by which you can find out the brightness level.
  • Varied color temperature. It is determined for industrial as well as office premises. Many experts strongly recommend choosing models with a neutral, or at least cold light.
  • Color rendering index. Devices with LED, in general, are characterized by a standard indicator of 80-85 points. The permissible limit, below which it is impossible to fall, can be called 80 points.
  • The choice of the type of diodes. This indicator affects the quality level of illumination.

In addition to these basic parametric indicators of emitters, it is necessary to pay close attention to the main design features and functionality of the product.

It is worth noting that the size of the lamp, as well as the angle of dispersion of the luminous flux, have a significant role. If we considerthat linear models on suspensions are installed only on the surface of the ceiling, the last parameter is quite important, because it is the angle that allows you to find out the exact dimensions of the area for lighting. Many users choose round, bell or square ceiling lamps, which not only perfectly diffuse light, but also fit all styles of interior.

The important point is also the supply voltage. Basically, for high-quality work of light sources in which diodes are used, the driver and power supply are used. These two devices ensure that the lighting device is connected to a power source that is 220 V. In warehouses, this is especially important.

It is best to choose models that can withstand significant fluctuations in changeable voltage in your main electricity network. To determine these products is quite simple. In any documentation for the device, the manufacturer must indicate the entire allowable range of voltage fluctuations. They have a special ring that regulates all these troubles. Some of the linear luminaires can function without losing their quality of illumination at a voltage of only 100-240 V.

The main operating conditions of many devices are quite complex (excessive dustiness of the room, high humidity, very aggressive environment for work), therefore, another significant parameter is the protection of products. For office buildings, it is permissible to use IP23 or IP20. In other large rectangular rooms (huge production areas, large and small warehouses, various utility rooms) it is always better to use models that have a degree of protection greater than IP30.

A freestanding group is a diode lamps, which are intended for operation in fairly harsh conditions. These devices most often have approximately the same dimensions as not quite protected counterparts. The degree of protection of these lighting devices is well above IP76.

In residential premises, suspended ceiling lamps in the high-tech style or, for example, modern are most often installed.

For these style directions of lamps, elements of different types are provided:

  • Cables or a special chain are used for suspensions.
  • Ceiling fixtures that are attached to single-tube lighting fixtures.
  • Linear products that diffuse light well.

The design of the lighting device must be chosen, taking into account what kind of light you need to receive, for example, directional or diffused. For directional light, you must purchase an open version of the ceiling. For scattered fit closed model.

Materials must fully comply with the interior of your premises.

You will learn more about LED pendant lights in the following video.

Comments
 Author
Information provided for reference purposes. For construction issues, always consult a specialist.

Entrance hall

Living room

Bedroom