Wallboard for steam room: the choice and rules of installation

The construction of the bath is a rather painstaking process because it requires the use of special materials that are well tolerated by moisture. After the bath is already built, you should decide on the finishing material. Among other types of raw materials, you can perform clearance using the lining. To understand how to choose material for the steam room, you need to be guided by the fact that the finishing in the bath performs a lot of functions, and therefore the requirements for it must be high.

Advantages and disadvantages

Lining is an excellent option, because it has a good appearance and has all the qualities that are necessary for the finishing material of the steam room. There are plenty of options than to process it without harm to health.

Due to the fact that there are many types of lining, you can trim the steam room in a style that you like more. Choosing this or that tree, you should think carefully what kind of bath you would like to see in the end. In addition, you need to calculate the price, since the cost is different for each type of wood. There are, of course, other types of finishing material, but they are more expensive and require much more attention during installation. In addition, the lining is easier to dismantle in case of damage.

Usually, the bath consists of a steam room, a shower and a dressing room. For each of these rooms there are specific requirements. That is why the material that will serve as interior decoration should have specific technical characteristics and be of high quality.

The main advantages of lining before other materials include:

  • value for money;
  • high moisture resistance;
  • resistance to high temperatures;
  • variety of species in stores.

Lining can be called environmentally friendly and safe for human health material. Since the temperature in the steam room is quite high, the material that will be used to decorate the room should in no case be heated.In addition, in order to know how to choose the material correctly, you need to inquire about the characteristics of the wood species from which lining can be made. Some types of wood can produce resins when heated, which sometimes cause allergic reactions. There are no obvious deficiencies in the lining, so you can safely buy this material for finishing.

How to choose a material?

For decorating more often choose lining of hardwood. It does not emit tar, has a pleasant aroma and does not heat up when the temperature in the steam room rises. In contrast to coniferous varieties, this species emits odors, which favorably affect the human body. Let us consider in more detail the advantages of each material.

Linden

Linden is a good option, it is quite durable and durable. Due to the high resistance to moisture, it is not deformed, it makes it possible to evenly distribute heat over the entire area of ​​the room. In addition, this material has a low heat capacity, so this coating will be safe, it will not leave burns on the body when touched.

Alder

Alder is a bit more expensive than linden or aspen, because its quality is much higher.This wall paneling has an ideal surface, and therefore does not require additional grinding work. It is characterized by high performance.

Cedar

Cedar is used to decorate the steam rooms in expensive institutions. This is due to the fact that the material has a luxurious appearance and has healing properties. Cedar does not require special care, and installation work with it is carried out quite easily. If you know how to sheathe the base of this clapboard with your own hands, then the cost of the masters can be saved.

Larch

Larch rightly deserves the title of the best material for finishing work in the steam room. Firstly, it has a beautiful pattern, and secondly, it is particularly durable and moisture resistant.

Elite

Such lining has a high cost and it is very sophisticated appearance and high strength. The most expensive and elegant sheathing material is oak. Besides him, the Abashi African tree is in great demand. It fell in love with the fact that it almost does not heat up, and therefore often shelves are made from it in the bath.

Pine

Pine wood - not the best option for finishing in the steam room. This finish will not be durable.In an attempt to save on sheathing material can be lost on quality.

Expense calculation

After the material is selected, the wall panel must be correctly calculated. So you can find out how much material is required for the entire area. To calculate the amount of finishing material needed, measure all the parameters of the room (height, width, length). Using these indicators, we calculate the area of ​​each wall, then we add them up and we get a figure that will show how much lining will be needed. You should know that it is better to buy 5-10% more material (in case something gets damaged during work or additional expenses arise). If you carefully study the technology of plating, installation does not require unnecessary costs.

What to process?

Any wood in the course of its operation is influenced by various factors. This may be the destruction of moisture, damage by rodents or due to thermal exposure. To ensure that the coating does not deteriorate during operation, you need to know what to process and impregnate the material so that the wall panel does not darken or deteriorate. Despite the fact that this procedure is quite logical, there are those who are against the use of impregnation.This is due to the fact that the impregnating materials are made from chemistry. Vapors that are excreted have a harmful effect on the human body.

But if the question of the need to treat the wall paneling with impregnations has already been resolved, you can cover it with the least safe materials.

Among such impregnations it is worth to provide the following means:

  • drying oil;
  • linseed oil;
  • antiseptic.

It is better not to feed the walls in the steam room, it is enough only to air it after each hike, to remove the dirt that has appeared. If a fungus is found, it is better to immediately treat this place with the help of folk remedies, without resorting to chemistry.

Mounting methods

You can mount vertically, horizontally and even diagonally. The most convenient option is a horizontal mount. Its advantages are that if the wood near the floor starts to deteriorate, the lower part can be easily replaced. Visually, the room in the bath expands, and air circulation decreases. Methods of fastening vertical reception also have a place to be, if you want to get the effect, as in a sauna (low humidity and high temperature).

Before you sheathe the bath inside, you must make a crate. This will allow for proper installation of the wall paneling.Only individual sections are usually fixed diagonally, since this type significantly increases material costs. If you combine all types of fastening, you can get a unique design. The main thing is to remember that in addition to beauty, you need to think about the convenience of dismantling some sections in the future. To save further costs, it is better to choose the best option.

How to sheathe?

To sheathe the steam room clapboard properly. Sheathing is a fairly easy process that does not require a large amount of power. Before you start, you need to take care of heat and vapor insulation. For the first best suited foam glass. After this work is done, you need to go to the vapor barrier. For this it is best to sheathe with foil. Basalt wool is often used as insulation. It is less susceptible to damage and more durable.

The best material for such a case would be a cork agglomerate. It does not give in to rotting, it is rare to find a fungus on it, it is not difficult to process the base with it. After this, it is worthwhile to proceed to the installation work, starting from the ceiling.Fix the wall paneling using ordinary screws and nails. You can also use the method that hides the cap and nail so, then the steam room takes on a more aesthetic appearance.

Beautiful finishes

Now it is necessary to learn more details about the designs. The most familiar and all favorite option is a discreet and concise style.

  • These are large wooden chairs, a table and a modest finish of linden or alder. For a dressing room, you can choose the finish of pine. It is not suitable for a steam room, but if there is a question how to sheathe a room in the bathhouse where there is no steam, pine or spruce will be more suitable than ever. Pine is usually chosen Scandinavian, because it has a beautiful pink shade and looks original in the room. Knowing how to beat the wall panel and decorate the dressing room, you can get a good modern bath.
  • If you want the steam room to look rich from the inside, it is better to remember the ways of fixing horizontally, to combine them together with the diagonal option. In this case, it is preferable to use such a breed as oak. This will be a smart design decision.
  • Do not forget that the bath is not only a steam room, but also a pool, as well as a shower.It is necessary to make sure that these rooms do not differ from the general view and look harmoniously. To do this, it is better to choose elements similar to the style of the sauna. For example, if the finish is oak, it is better to add products of red and gold colors.
  • Beautiful handmade chairs will not be superfluous either. In addition to them, do not forget about the light, it must be bright and warm. All wiring must be well protected from moisture.

The main thing is to remember that in one room you can not connect several types of wood. They do not linger together and begin to deteriorate quickly, creating unnecessary problems and costs for the owner. Such a decision may lead to a quick need for dismantling. In addition, they do not look expressively against each other and create an internal imbalance in the bath.

    On the rules for installing lining for the steam room, see the following video.

    Comments
     Author
    Information provided for reference purposes. For construction issues, always consult a specialist.

    Entrance hall

    Living room

    Bedroom