Standard dimensions eurolining

 Standard dimensions eurolining

Modern lining has a beautiful durable coating that allows you to use it in various fields. Boards are actively used in the finishing of facades and for interior cladding. They can be made by various technologies. You can select the paneling and lining. The latter option has a different thickness, different in appearance and groove connection.

Difference of lining from eurolining

There are some differences between these two materials for finishing.

  • Lining has a low level of humidity.Only 12%, and for normal lining acceptable value from 15 to 20%.
  • Lining is characterized by strict compliance with quality standards.
  • The front surface of eurolining is ideally smooth.
  • To pack euroboard, plastic film is used.
  • In Eurolining there are a large number of channels for ventilation, through which the condensate is drained. The same grooves allow for the removal of internal stress.
  • In Eurolaping, the groove has a size of 9 mm, while in conventional lining it is 5 mm.
  • Regular lining is characterized by the complexity of the installation, for which often call specialists. When it comes to the installation of eurolining, then it is quite possible to cope on their own.

Types and grades of eurolining made of wood

Wooden lining can be classified by production profile.

To date, the market can meet two profiles.

  • The standard, which can be referred to as ordinary lining, "collective farmer" or "classic." A special feature of this material for decoration is the minimum number of grooves, which are practically absent.
  • Lining has a similar appearance to the previous profile, but more stringent requirements are imposed on this material. In addition to these, when joining the lamellae in this case there is always a slight groove. In some situations, it reaches up to 15 mm.

    Imagine the most common types of eurolining, which are characterized by a vertical mounting method.

    • Softline - a view where the boards are slightly rounded. The width and length of the material allows you to quickly carry out the facade finish.
    • The wave is a type of eurolining, in which the front side is slightly concave.

      There are other types of wooden wall paneling, which differ in the horizontal mounting method.

      Here it is worth paying attention to several varieties.

      • American. With the help of this type of eurolining, it is possible to imitate the laying of wood planks. More often used for outdoor decoration. Lining is characterized by security in the area of ​​joints, where moisture can not get. Since these panels can be purchased in various widths, you can trim the house as quickly as possible.
      • Imitation timber. In this situation, the lining has a standard profile.
      • Block house. If with the help of this material to carry out the decoration of the building, then it will be like a log cabin. They differ in different lengths and widths, so the finish is quite simple.

      Dimensions eurolining

      Attention should be paid to the following factors:

      1. Lining can have a length of from 0.5 to 6 meters;
      2. on the market you can find these boards with a thickness of 13, 16 and 19 mm;
      3. the width of the lining can be 80, 100, 110 and 120 mm, these dimensions are optimal for the implementation of facing works in large rooms;
      4. spike size can vary from 8 to 9 mm.

      What deviations are optimal?

      It is possible to distinguish such permissible deviations:

      1. a length difference of a maximum of 5 mm is permissible;
      2. in thickness - 0.7 mm;
      3. in width - 1 mm;
      4. in thorn size - 0.5 mm.

        Due to the optimal size of the slats when working with wooden eurolining will not form a gap. At the same time, the material will not lose its appearance, which is extremely important in the issue of wall cladding.

        The existing dimensions of eurolining are designed to facilitate the process of surface plating with panels.

        Advantages and disadvantages

        To date, lining serves as a fairly popular finishing material.High demand for eurolining was formed at the expense of many advantages that many other types of finishing materials cannot demonstrate.

        Among the main advantages are several factors.

        • The most accessible material for finishing is wooden eurolining made of linden.
        • Ecological cleanliness is guaranteed.
        • The material in question has a beautiful appearance. Any wood used is unique. Customers have the opportunity to choose among a wide range of shades and structures, so you can create unique interior design options.
        • The material acts as an excellent thermal and sound insulation.
        • Lining will be operated for a long period, especially if it will be provided the right care. It is able to serve its owners for up to 50 years, while maintaining its original unique look.
        • Wooden eurolining is characterized by ease of installation, which is possible due to the presence of the ridge and grooves. With the help of these panels, you can perform facing as soon as possible, while you do not need to be a professional in this area to perform these works.
        • With the help of eurolining, you can perform additional finishing.
        • Today, you can purchase different sizes of eurolining made of wood, most suitable for a particular room, based on the surface area to be sheathed.

        Despite the impressive list of the advantages of the material in question, there are drawbacks to the eurolining, but there are very few of them.

        The negative aspects are several indicators.

        • When operating eurolining made of wood, there is a risk that it is deformed. It mainly depends on the type of wood on which you chose the implementation of plating.
        • The material under consideration does not cope well with temperature fluctuations and is sensitive to increased humidity, but these parameters also depend on the wood of which the boards are made.
        • It should be emphasized that the previously mentioned disadvantages do not seem catastrophic, since they can be neutralized through the use of special processing boards and high-quality installation.

        If you want to buy euroboard, you need to know exactly in what conditions it will be used.For example, it will be installed in rooms with high humidity. In such a case, it is important to pay attention to conifers. When it comes to facing dry rooms, boards from deciduous trees can come up here.

        You need to immediately determine the optimal size of the purchased panels. If the room has a relatively small size, it is better to pay attention to the panel with a small width. When finishing large rooms it is worthwhile to opt for a material with a large width of boards, as this will facilitate the process of covering.

        What is the best lining to choose?

        In order not to make a mistake in the choice of eurolining, you should pay attention to many parameters.

        • The quality and breed of wood used. To do this, you need to familiarize yourself with the properties possessed by one or another type of wood. It is necessary to choose depending on the conditions in which the material will be used.
        • Eurolining lengthwhich directly affects its value. The longer the board, the more expensive the material.
        • Quality of drying. Panels must be well dried.For example, lining should contain no more than 12% moisture. Only in this case it can be considered ready to use. You can measure the humidity using a special device.
        • Features of woodworking. If the panels were made using modern equipment, then the deviation from the standard indicators will be minimal. It is necessary to take into account the fact that today customers can buy eurolining made of solid or spliced ​​wood. Each of the options under consideration has its specific advantages. Solid wood has an attractive appearance, but the cost of this material is quite high. In the case of spliced ​​Euromasks, seams are visible, but this does not affect the quality.
        • Grade. Here it is necessary to pay attention to the type of wood from which the boards are made.
        • Storage. Lining must necessarily be stored in a closed dry place, which has good ventilation. Unfortunately, many sellers of this material leave the boards in the open air, where they are exposed to moisture and ultraviolet radiation. Pay attention to the presence of blue.If so, this indicates that the wood is infected with a fungus.
        • Manufacturer. Experts recommend to give preference to manufacturers from the northern regions of the country, due to climatic conditions, where raw materials for this material grow.

        It is important to note that you have the opportunity to purchase eurolining from another material, for example, plastic, however, over the years of its operation, wood has proven to be exclusively from the good side. With the help of this natural material, you can create a unique interior design, while you will be sure that the boards used for plating will serve you for years.

        The process of mounting eurolining is shown in the following video.

        Comments
         Author
        Information provided for reference purposes. For construction issues, always consult a specialist.

        Entrance hall

        Living room

        Bedroom