Corner cast iron baths: features of choice

To date, the bath is a necessity. This sanitary device is present in almost every home. Carrying out repair work in the bathroom, many are considering various design projects involving corner baths. They look attractive, while they have many other advantages that we consider in this article.

Shape comfort

Oval and rectangular baths are the most familiar to everyone, but they are not always convenient and rational in certain planning conditions. As a rule, the bathroom in standard apartments does not have a large area, so the usual design may simply not fit in the available space. The angular shape is comfortable due to the following features:

  • It saves space. In such a bath can comfortably accommodate a tall person, while the bathroom can fit in a small room.
  • There is a wide range of these types of baths.. You can get acquainted with a rich model range, where there are different types of cast iron baths with a large number of configurations.
  • Convenience. The presented design and shape is characterized by ergonomics. It is much more convenient to use it than a standard rectangular bath.

    It is worth paying attention to that moment, why these bathrooms are made much less frequently than standard ones. This is due to the complexity of processing the material used. Cast iron alloy is characterized by high strength and low ductility, while it is quite fragile, therefore, the manufacture of round and complex shapes is accompanied by certain difficulties.

    Asymmetric products are made with the following parameters: 170x110, 120x120 and 120x70.

    170x110
    120x120
    120x70

    Advantages and disadvantages

    Cast iron corner bath is a bargain because its service life exceeds half a century. Many professionals note that cast iron appears as the most successful material in the production of sanitary bowls. The considered models are characterized by many advantages:

    • Long operational term. A bath made of cast iron without problems can be used for several decades without losing its original properties.
    • Slow cooling. The material in question is characterized by a low degree of thermal conductivity, which is why hot water that has been poured into the bath will cool slowly enough.
    • Resistant to chemical detergents and temperature extremes.. Cast iron bath perfectly copes with the effects of hot and cold water, while it can be cleaned with potent means.
    • Attractive appearance. Corner bathtubs made of cast iron can perfectly fit into any interior, emphasizing the refined style and wealth of the owner.
    • Cast iron is such a material that is very easy to restore. This procedure is usually necessary to update the surface gloss after many years of use.
    • This is a cost-effective purchase., since repair or replacement will be required to you a long time after the start of operation.

      Manufacturers noted that these baths are very often serve up to 100 yearshowever, for this it is necessary to periodically restore and renew the enamel coating, which is the weak point of the product.

      Despite the obvious advantages of the bath in question, manufacturers rarely produce angular models made of cast iron. This is largely due to the fact that not all firms have the required equipment, qualifications and knowledge of how this alloy should be processed. On this basis, an unusual shape cast-iron bath will become an exclusive product that not many people can afford. Despite the abundance of advantages, these products are characterized by several disadvantages:

      • Great weight. A standard cast iron bath weighs about 100 kg. In the case of the angular design, its weight exceeds 150 kg without taking into account the amount of water recruited. It is important to understand that not every floor is designed for such loads, so the installation of this bath is not possible everywhere.
      • A layer of enamel, which is applied to the surface of the bowl, tends to wear out faster than cast iron. If the bath was operated improperly, and it was not provided with proper care, then over time a yellow tint will appear, chipping and cracks are possible.
      • Custom shape and sizewhich complicate the transportation and installation of these baths, especially if they are placed in a small bathroom. Often it is required to analyze the doorway only in order to bring the bathroom to the apartment.
      • Relatively high price. Angular models cost at least 50,000 rubles, and if there are high-tech additions, then the product will cost over 150,000 rubles.

        Based on the above, it becomes clear that a bath with a similar mass and size needs a large room. Previously, you need to make calculations to determine whether the overlap can withstand such a high load.

        It is important to note that many of the shortcomings of this product are due to poor-quality production.

        Making the right choice

        When it comes to such an expensive purchase, it is necessary that it justifies itself, that is, it can serve as long as possible. That is why it is important to seriously consider the choice of a cast-iron corner bath. The difficulty lies in the fact that you usually do not have the opportunity to see the plumbing bowl, since such complex structures are often made to order.However, when choosing you should pay attention to some factors.

        Dimensions

        This is a very important selection criterion, because if it is wrong to choose the size of the product, then it simply may not fit in the room, or there will be an unnecessary space between the bathroom and the wall.

        First of all, it is necessary to make accurate calculations of the place in which it is planned to install the bath. It is important to take into account the features of the angular design, so that the obtained calculations are as accurate as possible. The place should select taking into account whether there is access to communications, that is, The corner bath should be located where there is a sewer system and water supply.

        Domestic manufacturers create cast-iron corner baths up to 170 cm long, and foreign ones provide for a length of up to 180 cm. Bowls are 60 to 160 cm wide, and their depth is in the range of 40-65 centimeters.

        180x120
        170x160

        Coating

        Which must be inspected before taking the product. Cast iron is a fairly complex metal that is difficult to work with. That is why not every manufacturer provides products with a smooth surface.If the surface is smooth and uniform in color, and manufacturing standards are followed, then this product is characterized by the highest quality.

        Once you inspect all the walls outside, determine the presence or absence of defects, you must consider the inside. On the enamel surface should not be present cracks, chips and abrasions. The thickness of the enamel should be uniform, without thickening.

        Cast iron thickness

        Domestic corner models visually look strictly, because they are made from a material whose thickness is about 7 mm. European manufacturers use cast iron with a thickness of 5 mm.

        Availability of warranty and certificate

        Before making a purchase, you must make sure that the purchased cast-iron bath has a quality certificate and a guarantee from the manufacturer. This is for you a certain guarantee that the products really meet all the stated requirements.

        Availability of additional functions

        Cast iron corner baths can be equipped with useful features. As an example, we can note the presence of hydromassage, which will allow a person to relax after a hard working day and get healthier.

        Hydromassage is not the only supplement that may be present in such baths. As other functions worth noting automatic drain, unique handles, electric heating. It should be neat with these additions.

        If you do not plan to use them, then you should not overload the bath with various devices. This will only raise the price of the purchased product.

        Product term

        The operational life of the product, which affects the quality of the casting material and the reliability of enamel. If there are any defects in the bowl, then in a few years it will be necessary to restore the enamel of the bath or to restore it from chipping and cracking. Even a small scratch or a weakly visible crack can cause serious damage in the future.

        Manufacturer Reputation

        Which must be flawless. When it comes to such expensive plumbing, in no case should you buy it from companies unknown to you. It should be noted that foreign-made corner cast-iron baths are more elegant than domestic ones.

        If you and your family prefer not only to take a bath, but also a shower, then you should not get a large bathroom that will occupy half of the room. It is best to pay attention to the angular design.With a small area of ​​the bathroom, the corner structure will look most advantageous, since it will not hide the usable space.

        In a situation where there are young children and the elderly in the house, it is best to opt for models with a seat and handles, since these equipments provide additional ease of use.

        It is important to note that corner bath does not necessarily support the wall. If the area of ​​the bathroom allows, in this case, the font can be placed in the middle, which will become an unusual design move and allow you to zone the room as needed.

        Where can one buy?

        Find a similar corner bath in Russia is problematic. Domestic manufacturers make baths of cast iron of various widths and lengths, but they are mostly rectangular or oval designs. In stores it is rare to find a corner bath made of cast iron, so they are usually purchased to order. This is a very profitable service, thanks to which you will be able to get a handy sanitary fixture. It will be as much as possible adapted under an interior of your premise and will satisfy all requirements.

        Manufacturers

        You must take into account the fact that buying an angular bath made of cast iron from an untested manufacturer is an unwarranted risk, since it is an expensive product. Manufacture of such structures are usually engaged in firms that have a world name. They distribute their products not only in the territory of their country, but also abroad. As an example, the company ROCA, whose products are particularly popular and has a long operational period.

        How to choose a bath, see the next video.

        Comments
         Author
        Information provided for reference purposes. For construction issues, always consult a specialist.

        Entrance hall

        Living room

        Bedroom